• <sup id="6ques"><button id="6ques"></button></sup>
  • <sup id="6ques"></sup>
  • <sup id="6ques"><button id="6ques"></button></sup>

    CN | EN

        • Fiber Optic Intrusion Detection System

        • Fiber Optic Intrusion Detection System Solution

        • Fiber Optic Intrusion Detection System Classic Case Series

        • Fiber Optic Intrusion Detection System Video Introduction

      • HD-SDI Surge Protector
        RV705 HD-SDI Surge Protector

        4U Rack Mounting Chassis
        RV600C HD-SDI 4U Rack Mounting Chassis

        4U Rack Mounting Chassis
        RV600C HD-SDI 4U Rack Mounting Chassis

        HD-SDI Surge Protector
        RV705 HD-SDI Surge Protector

        • HIFI Audio Optical Transceiver

          ● RV6X4-2A         2-ch unidirectional HIFI
          ● RV6X4-4A         4-ch unidirectional HIFI
          ● RV6X4-4A-1U    4-ch unidirectional HIFI-1U
          ● RV6X4-8A         8-ch unidirectional HIFI
          ● RV6X4-2A-2BA   2-ch bidirectional HIFI
          ● RV6X4-4A-4BA   4-ch bidirectional HIFI

          ● Compact design with 1U height
          ● XLR interface for Audio
          ● SNR is better than 92dB
          ● 192K sampling frequency
          ● 24 bit quantized accuracy
          ● Provides AC110~220V dual power redundancy

        • SDI Converter

          ● 75ΩBNC connector for SDI input and looping out
          ● VGA output interface
          ● Two unbalanced RCA audio output with 600Ω impendence...

          ● Features 1 VGA input, 2 audio inputs and 1 SDI output
          ● Supports asymmetrical conversion for any format
          ● The input and output video format can be shown on the screen...

          75Ω BNC connector for SDI input and looping out

          ● HDMI output interface

          ● Two unbalanced RCA audio output with 600Ω impendence...

        • SDI Distribution Amplifier

        • 4U Rack Mounting Chassis

          ● 19 inch and 4U height
          ● 16 traffic card slots and 1 management card slot
          ● 3 fans embedded
          ● Dual power supplies for power redundant protection
          ● Provides one RS232 management interface(CONSOLE) used for CLI management...

        • HD-SDI Surge Protector

          and Pattern Generator

          ● Multi-level protection, low residual voltage
          ● Short response time   
          ● Large thermal capability and low limiting voltage
          ● Stable performance and long service life...

          ● Comply with SMPTE-424M 3G-SDI, SMPTE-292M HD-SDI and SMPTE-259M SD-SDI standard
          ● Support 1080P@59.94/29.97, 1080I@59.94, 720P@59.94, 525I@59.95 format of NTSC...

        • CHIP

        • Multi-Service Access Platform

          3U height, 19 Inch width standard, 9 card slots.

          Up to 2 GE optical ports and 2 GE electrical ports

          Aggregate the 1000M Ethernet traffic from up to 3 downlink cards...

          ● 7U height, 19 Inch width standard, 16 card slots.

          ● Up to 4 GE optical ports and 4 GE electrical ports.

          ● Each card can aggregate the 1000M Ethernet traffic from up to 8 downlink cards...

        • Converter

        • Compact SDH

        • Compact PDH

        • Channelized Industrial Ethernet switch

          Optical interface
          ● Two optical interfaces; SFP optical module (LC interface); Hot plugging...
          Ethernet interface
          ● RP105SA:One fiber and two copper Gigabit Ethernet interfaces
          ● RP106: Four fast Ethernet interfaces...

      • CONTACT US

      • Mobile: 86-13810132168
      • Tel: 86-10-80106100-157
      • Skype ID
      • live:d8d61896f81afc11
      • 服務時間

      • 周一至周五 9:00-18:00
      • WeChat qr code

    RS1020
    RS1020

    63E1 Compact SDH Transmission System (RS1020)

    RS1020 is the 63E1 compact STM-1 level Synchronous Digital Hierarchy (SDH) transmission system compatible with ITU-T standard. It is designed as a modular system with two 155.520Mb/s optical interfaces to provide an ultra-compact, cost-effective and high capacity platform. It provides fully cross-connect between all tributaries.
    • 999999999999999

       

       

      Overview                         

      RS1020 is the 63E1 compact STM-1 level Synchronous Digital Hierarchy (SDH) transmission system compatible with ITU-T standard. It is designed as a modular system with two 155.520Mb/s optical interfaces to provide an ultra-compact, cost-effective and high capacity platform. It provides fully cross-connect between all tributaries, and can be used as Terminal Multiplexer (TM) or an Add-Drop-Multiplexer (ADM) to build point-to-point, ring and chain transmission network.

       

      Feature

      Achieve Multiplexing from 63 E1 to 2 STM-1 optical interfaces 

      1U height, 19 Inch width standard

      Service interface

      Two STM-1 optical interfaces, SFP optical module (LC connector)

      Maximum 63 E1 interfaces compliant with ITU-T G.703, optional unbalanced/ balanced interface

      System interface

      • Ethernet management interface: EMU (RJ45 connector)
      • RS232 network management interface: CONSOLE (RJ45 connector)
      • RS232 user channel interface: RS232 (RJ45 connector)
      • External synchronization interface / Extendable management interface : ETS1/EXM1, ETS2/EXM2 (RJ45 connector)
      • UALM and DALM output interface: U/DALMO (DB9 connector)

      Timing mode

      STM-1 line timing (T11,T12)

      Tributary timing from E1-1 to E1-63 (T2)

      External timing source input (T31/T32), 2048Kbit/s by default and 2048KHz selectable

      External timing output (T41/T42), 2048Kbit/s by default and 2048KHz selectable

      ITU-T G.813 internal oscillator

      The timing source can be auto-switched according to SSM or operator settings

      Supports 1+1 protection and Automatic Protect Switch (APS) with the switching time less than 50ms

      Supports Remote power Down Detection (RPD) and Auto Laser Shutdown (ALS)

      Supports embedded BERT and various loop back for troubleshooting

      Highly efficient management system

      Supports NE management based on CLI command via RS232 interface or TELNET

      Supports Network management based on PC via unified platform: RAYVIEW

      Supports three network management types: Traditional DCC management, Inner DCN management (by some VC12 channel) and outer DCN management (by E1 cable via outer EXM interface).

      Power system

      Two backup power supply

       220V AC or-48V DC single power

       -48V DC & 220V AC double power 

      -48V DC & -48V DC double power 

       220V AC & 220V AC double power 

      Power consumption less than 25W

       

      Application

       

      RS1020 can be used as Terminal Multiplexer (TM) or an Add-Drop-Multiplexer (ADM) to build a point-to-point, ring or chain transmission network. As following figures shows:

       

       

      img1

       

      Fig. 1 Point to point network

       

       

      img2

       

      Fig. 2 Chain network

       

      img3

       

      Fig. 3-3 Ring network

       

      Note:  Make sure optical A of one NE must be connected with optical B of its neighboring NE.

       

       

       

       

    • 0

    Other  Products

    ?Contact us
    Verification code

    Contact Form

    PRODUCTS

    自在自线亚洲а∨天堂在线_亚洲国产精品久久电影欧美_日本黄色免费播放视频网站_手伸进内衣使劲揉搓奶头漫画
  • <sup id="6ques"><button id="6ques"></button></sup>
  • <sup id="6ques"></sup>
  • <sup id="6ques"><button id="6ques"></button></sup>